Alpine Van Works, LLC

Dual-Fold Single Bench-To-Bed Seat

SKU: AVW-DFS-B2B
In stock
£1,993.00
Flat rate $300 shipping
Aluminum Seat Base with Storage Cubby
OVP Install Center- For your install needs

Chat with our team

Email +1 (402) 366-9037
Ready to install and hit the road!

All parts come with the essentials you need for a smooth fit and clear instructions. From performance upgrades to custom styling, unbox and get your ride ready with confidence!

Need help? OVP Install Center is here to help!

10% Off this product when booking an install with Drive OVP - Our Professional Install Center

Our Dual-Fold Single Bench-To-Bed Seat is the perfect choice for vans and RVs with limited space. The single 20" chair flips forward creating a bed in conjunction with the front swivel seat. L-track mounting brackets provide easy installation and secure placement. With its car seat restraints and 3-point harness, as well as a cubby for storage in the aluminum seat base, this seat offers essential features for comfort, safety, and convenience.

While the seat or base has not been pull tested to any DOT standards (because it is cost prohibitive), the seat base and mounting were designed by an engineer with a baby on the way and it was designed to withstand at least 8,000lb pull test. Please note that RV's are not held to DOT standards for seating partially because of their weight and the momentum that creates. 
  • Mounting Hardware
  • (2) 40-inch Pieces of Recessed Flange L-Track
  • Optional Add on: Uwin Quick Release Seat Lockers (+$500 per seat)
  • Aluminum Seat Base with Storage Cubby
  • CRS Hooks (Carseat Hooks)
  • 3pt Harness (Seatbelt)
  • High-End Faux Leather Upholstery

Uwin Seat Lockers are helpful if you are removing the seat often but they do raise the seat up 1.25 inches which makes it slightly higher than the driver seat when spun around.

When using our Single B2B Seat in bed mode we recommend using a camping mattress to make it more comfortable.

Download Install Instructions Here.

These seats are intended for off-road, recreational, commercial, show, or specialty vehicle applications unless otherwise specified.

Alpine Van Works has not independently tested or certified these seats, mounting systems, or seat belt anchorage systems to Federal Motor Vehicle Safety Standards (FMVSS) for use as occupant seating positions in on-road motor vehicles. Compliance with applicable federal, state, provincial, and local laws and regulations is the responsibility of the vehicle owner, installer, and final vehicle manufacturer.


Improper installation may result in serious injury or death. Seats, seat bases, mounting hardware, floor systems, and seat belt anchorage points must be properly engineered and installed for the specific vehicle application.

By purchasing these products, the customer acknowledges that Alpine Van Works makes no representation that a particular seat or installation configuration meets FMVSS requirements unless expressly stated in
writing.

  • Install Note

    If you are planning to install our Single B2B Seat into a vehicle that is not a Sprinter, please note that it will not be the same elevation as the front seats.

  • Recommendation

    We recommend using a firm pillow under your camping pad to raise it up and to sleep with your feet to the front.

Dimensions