DV8 Offroad

MTO Series Mid-Size Truck Bed Rack | Universal

SKU: RRUN-02
In stock
$999.99
Flat rate shipping
Fast shipping
OVP Install Center- For your install needs

💬 Got questions? Contact Us

Ready to install and hit the road!

All parts come with the essentials you need for a smooth fit and clear instructions. From performance upgrades to custom styling, unbox and get your ride ready with confidence!

Need help? OVP Install Center is here to help!

These MTO Series Universal Mid-Size Truck Bed Rack was designed to fit a wide variety of trucks, including the Tacoma, Gladiator, Ranger, Canyon, & Colorado. This 2-piece adjustable system accommodates different bed lengths or to better mount a RTT or other gear. With a height of 8-inches from the top of the bed, a collapsed roof top tent will sit at or slightly above the roof of your cab to keep wind drag/noise at a minimum. Accessory mounting provisions are provided along each wall, perfect for a range of different gear. Included with the rack are mounts & hardware for hi-lift style jacks that can be mounted to these locations. 

The MTO Series Bed Rack also provides mounting plates compatible with Standard RotopaX Mounts (Not Included), where you can run either (2) 1 Gallon RotopaX or (2) 3 Gallon RotopaX (with RotopaX extensions). They also provide 8 D-rings on the interior of the rack that can be used as tie-down points. Hidden light pod/bar mounts run the entire length of the rack on each side, giving you a variety of lighting options. Zip-tie tabs are strategically placed along the interior of the rack and can be used for clean wire management. The bed rack is finished in a micro-texture black powder coat and features a simple & quick installation. 

Please Note: It is recommend 750lbs as a guideline for static load capacity.  Please refer to your truck’s manual for load limits for your specific model.
  • Universal Overland Bed Rack for Mid-Size Trucks
  • 8” Height Keeps Low Profile for Roof Top Tents
  • 2-Piece Design Fits Multiple Bed Lengths
  • Mounting Plates for (2) 1 Gal RotopaX with Standard RotopaX Mount or (2) 3 Gal
    RotopaX with Standard RotopaX Mount and 3 Gal Extension
  • Includes Mounts & Hardware for Hi-Lift Style Jacks
  • Includes 8 D-Rings for Tie-Down Points
  • Works With or Without Factory Bed Side Rail Mounts
  • Hidden LED Light Pod/Bar Mounts Along Entire Rack
  • Zip-Tie Tabs for Clean Wire Management
  • Micro-Texture Black Powder Coat Finish

Confirmed Fitment on: Toyota Tacoma, Jeep Gladiator, Ford Ranger, GMC Canyon, & Chevy Colorado + more mid-size trucks


2-piece adjustable system accommodates different bed lengths.
  • Material: 3mm, 3.5mm, 4mm, and 5mm Steel Plate
  • Finish: Micro-Texture Black Powder Coat
  • Fitment Notes: Rotopax mounts will not work with factory Tacoma bedliner that has the storage boxes.
  • Installation Notes: No Cutting Required, direct fit bolt-on. Estimated 2.5 hour install. We recommend 750lbs as a guideline for static load capacity. Please refer to your truck’s manual for load limits for your specific model.

WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.